USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
32
Creating a User Profile
To create a user profile:
1. Select User Management, and then select Users & Groups. The User/Group
Management page displays. This page is divided into a User Management panel
(see Figure 35) and a Group Management panel.
Figure 35. User/Group Management page − User Management Panel
NOTE Before entering any information in the user profile, please make sure the user group is created and
available for selection.
2. Type the following information about the user in the corresponding fields in the
User Management panel:
Fields Enter
New User Name The name the user will enter to log into the Web interface.
Full Name The user’s first and last name.
Password The password the user will enter to log in.
The password must be at least four characters long, and spaces are not
permitted. The password is case sensitive, so be sure to capitalize the same
letters each time.
Confirm Password Reenter the user’s password.
Email Address An email address where the user can be reached.
Mobile Number A cell phone number where the user can be reached.
NOTE The New User Name, Password, and Confirm Password are the only required fields.
To Next Page
Loading...
Need help?
General
