Eaton Managed ePDU User Manual

USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
54
Setting Default Outlet State
You can set a global default for the power state of the outlets when the ePDU is
powered on. Setting an individual outlet startup state to something other than Device
Default (see Naming Outlets on page 57) overrides this default state for that outlet.
To set this default:
1. Select Device Settings, and then select Unit Setup. The Unit Setup page displays.
Figure 50. Unit Setup Page
2. Select the default state from the Default outlet state on device startup list.
3. Click Apply. The default state is set.

Eaton Managed ePDU Specifications

General

Brand	Eaton
Model	Managed ePDU
Category	Power distribution unit
Language	English