Eaton Managed ePDU User Manual

USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
43
Enabling Group−based Access Control Rules
To enable group−based access control rules:
1. Select Device Settings, and then select Security. The Security Settings page
displays. The panel labeled Group Based System Access Control controls this
feature. See Figure 42.
Figure 42. Group Based System Access Control Panel (Enabled)
2. Select the Enable Group Based System Access Control check box. This enables the
feature.
3. Click Apply. Group−based access control rules are enabled.
Changing the Default Action
The default action is shown in the Group Based System Access Control panel on the
Security Settings page. To change the default action:
1. Select Device Settings, and then select Security. The Security Settings page
displays. The panel labeled Group based System Access Control controls this
feature.
2. Select the Enable Group based System Access Control check box if it is not already
selected.
3. Select the action you want from the Default Action list in the (see Figure 42).
4. Click Apply. The default action is applied.

Eaton Managed ePDU Specifications

General

Brand	Eaton
Model	Managed ePDU
Category	Power distribution unit
Language	English