USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
71
Configuring NFS Logging
To configure Network File System (NFS) logging:
1. Select Device Settings, and then select Event Log. The Event Log Settings page
displays. The NFS Logging panel controls NFS logging (see Figure 66).
Figure 66. NFS Logging Panel
2. Select the NFS Logging Enabled check box.
3. Type the IP address of the NFS server in the NFS Server field.
4. Type the name of the shared NFS directory in the NFS Share field.
5. Type the name of the NFS log file in the NFS Log File field. The default is evtlog.
6. By default, when NFS logging is enabled, seven event types display in the
Event Log Assignments panel to the right. All are disabled by default. To enable any
of these event types, select the corresponding check boxes. See Figure 67.
Figure 67. Event Log Assignments Panel (List and NFS Logging)
7. Click Apply. NFS logging is configured.
To Next Page
Loading...
Need help?
General
