Eaton Managed ePDU User Manual

USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
56
Setting the Outlet Power−Up Sequence
You can set the order in which the ePDU outlets power up. This is useful when
devices have multiple power supplies that should be powered−on together. To do this:
1. Select Device Settings, and then select Unit Setup. The Unit Setup page displays.
2. The current outlet power−up sequence displays in the list under Outlet
Sequencing (see Figure 52). To change the priority of an outlet, select it from the
list and click one of four options:
S First moves the outlet to the top of the list and makes it the first outlet to
receive power.
S Up moves the outlet up one position in the list.
S Down moves the outlet down one position in the list.
S Last moves the outlet to the bottom of the list and makes it the last outlet to
receive power.
Figure 52. Outlet Sequencing
3. Click Apply to save the new sequence.
NOTE If you use Outlet Grouping to group outlets together, you should adjust the Outlet Sequencing to
ensure that all outlets from this ePDU, that are part of the same group, power up consecutively.

Eaton Managed ePDU Specifications

General

Brand	Eaton
Model	Managed ePDU
Category	Power distribution unit
Language	English