Eaton Managed ePDU User Manual

USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
73
Configuring SNMP Logging
Event logging can be performed by sending SNMP traps to a third−party SNMP
manager. See Appendix C − Using SNMP" for instructions on enabling SNMP Event
Logging on ePDU.
Configuring Syslog Forwarding
To configure Syslog Forwarding:
1. Select Device Settings, and then select Event Log. The Event Log Settings page
displays. The Syslog Forwarding panel controls the forwarding of system logs
(see Figure 70).
Figure 70. Syslog Logging Panel
2. Select the Enable Syslog Forwarding check box.
3. Type an IP address in the IP Address field. This is the address to which the Syslog
will be forwarded.
4. By default, when Syslog Forwarding is enabled, seven event types display in the
Event Log Assignments panel to the right. All are disabled by default. To enable any
of these event types, select the appropriate check boxes. See Figure 71.
Figure 71. Event Log Assignments Panel
5. Click Apply. Syslog Forwarding is configured.

Eaton Managed ePDU Specifications

General

Brand	Eaton
Model	Managed ePDU
Category	Power distribution unit
Language	English