Eaton Managed ePDU User Manual

USING THE WEB INTERFACE
EATON Managed ePDUt User’s Guide S 164201xxx Rev 1 DRAFT 10−OCT−2008
82
Resetting the ePDU
You can use Unit Reset function to reboot the ePDU from the Web interface. To do
this:
1. Select Maintenance, and then select Unit Reset. The Reset Operations page
displays (see Figure 79).
Figure 79. Reset Operations Page
2. Click Reset. A Reset Confirmation page displays (see Figure 80).
Figure 80. Reset Confirmation Page
3. Click Really Reset to reboot ePDU. If you change your mind, click Cancel to
terminate the reset operation.
If you choose to proceed with the reset, the Reset Conclusion page displays and
the reset takes place. The reset takes about one minute to complete.
See Figure 81.
Figure 81. Reset Conclusion Page
4. When the reset is complete, the Login page displays, and you can log back into
the ePDU.

Eaton Managed ePDU Specifications

General

Brand	Eaton
Model	Managed ePDU
Category	Power distribution unit
Language	English