Epson VT6L User Manual

Maintenance 18. Controller Unit
238 VT Rev.1
18.4 Replacing Lithium Battery
Name
Quantity
Note
Maintenance
parts
Lithium Battery 1 2113554
Replace the battery within 30 minutes after turning OFF.
If more than 30 minutes pass after removing the battery, voltage of the capacitor lower and
time may be reset.
Lithium Battery
Removal
(1)
Remove
the CPU/DPB board from the base.
Reference: Maintenance 18.3 Replacing CPU/DPB Board
(2)
Remove
the battery from the battery connector.
Lithium Battery
Installation
(1)
Connect a new battery to
the battery connector.
(
2)
M
ount the CPU/DPB board to the base.
Reference: Maintenance 18.3 Replacing CPU/DPB Board

NOTE

Epson VT6L Specifications

General

Brand	Epson
Model	VT6L
Category	Robotics
Language	English