Epson VT6L User Manual

Setup & Operation 3. Environments and Installation
30 VT Rev.1
Use cable clamp on rear side of the Manipulator to fix AC power cable.
AC Power Cable Clamp
3.6.3 Breaker
Install an earth leakage circuit breaker or a circuit breaker in the AC power cable line.
For the rated electric current of the circuit breaker, refer to the following set values.
Manipulator
Power
Rated electric current
VT6L
AC100V
20A
AC200V
10A
If you install a circuit breaker, please select one that can handle the “peak current”
described in the following section.
Setup & Operation 3.6.1 Specifications
The power receptacle shall be installed near the equipment and shall be easily accessible.

Epson VT6L Specifications

General

Brand	Epson
Model	VT6L
Category	Robotics
Language	English