03-20
Auxiliary Systems
03-20
FUEL PUMP SERVICE AND MAINTENANCE
The only routine maintenance is to occasionally (every
250 to 500 hours) clean the built-in filter. To service the
filter, take off the base plate and gasket by removing
the three cap screws. Then, with clean hands, lift the
filter out, handling it by the edges. Clean by blowing air
through the filter from the inside to the outside.
Reinstall the filter, gasket, plate, and cap screws.
0
TO SERVICE FILTER, TAKE OFF BASE
PLATE AND GASKET BY REMOVING
3 CAP SCREWS
PPDOOI 1
To Next Page
Loading...
Need help?
General
