02-I 7 Engine Service, 2.3L 02-I 7
2.3L ENGINE SERVICE (Continued)
Camshaft Timing Belt Inner Cover
Removal
1. Remove timing belt as outlined in this section.
2. Remove timing belt tensioner as outlined in this
section.
3.
Remove oil pump sprocket as outlined in this
section.
4. Remove screw and nut securing inner timing belt
cover to cylinder block.
5. Loosen stud two or three turns.
6. Remove inner timing belt cover.
Installation
1.
Position inner timing belt cover on front of engine
and stud,
2. Install nut and bolt and tighten to 8-12 Nom
(72-l 08 lb-in).
3.
Tighten stud to 20-30 Nom (15-22 lb-ft).
4. Install oil pump sprocket as outlined in this
section.
5.
Install timing belt tensioner as outlined in this
section. Tighten M8 bolt to 22-27 Nom (16-20
lb-ft) and Ml0 bolts (3) to 40-55 Nom (29-40
lb-ft).
6.
Install timing belt as outlined in this section.
&
FRONT OF ENGINE
A23960-A
Item
Part
Number
Description
1 N808049-S102 Stud, M8-1.25 x 51
2 6E005
Inner Timing Belt Cover
3 6049 Cylinder Head
4 6010 Cylinder Block
5 6600 Oil Pump
6 N804958-S8 Bolt, M6-1 x 22.5
7 N621506-S2
Nut, M6-1
A -
Tighten to 20-30 Nom (15-22 Lb-Ft)
B -
Tighten to 8-12 Nom (72-108 Lb-In)
To Next Page
Loading...
Need help?
General
