02-54 Engine Service, 2.3L
02-54
2.3L ENGINE SERVICE (Continued)
8. Lubricate connecting rod bearings (6211) with
Motorcraft Super Premium Motor Oil
X0-5W30-QSP, or equivalent, 5W30 motor oil
meeting Ford specification ESG-M2C153-E.
9.
Install connecting rod cap.
IO. Hand start connecting rod nuts (6212) until nuts
are flush with ends of connecting rod bolts.
11. Alternately tighten connecting rod nuts to 34-41
Nom (2530 lb-ft). Then alternately tighten again
to a final torque of 41-49 Nom (30-36 lb-ft).
12. Install oil pump screen cover and tube as outlined
in this section.
13. Install oil pan as outlined in this section.
14. Install spark plugs.
To Next Page
Loading...
Need help?
General
