FS TAP Series User Manual

TAP Series Switch Command Line Reference
102
Command Syntax
port-channel load-balance set (src-mac | dst-mac | src-ip | dst-ip | ip-protocol | src-port-l4
| dst-port-l4 | inner-dst-mac | inner-src-mac | inner-src-ip | inner-dst-ip | vxlan-vni | gre-
key | nvgre-vsid | nvgre-flow-id )
no port-channel load-balance set (src-mac | dst-mac | src-ip | dst-ip | ip-protocol | src-
port-l4 | dst-port-l4 | inner-dst-mac | inner-src-mac | inner-src-ip | inner-dst-ip | vxlan-vni
| gre-key | nvgre-vsid | nvgre-flow-id )
no port-channel load-balance
src-mac
Load balance by source MAC address
dst-mac
Load balance by destination MAC address
src-ip
Load balance by source IP address
dst-ip
Load balance by destination IP address
ip-protocol
Load balance by ip-protocol
src-port-l4
Load balance by source port
dst-port-l4
Load balance by destination port
inner-src-mac
Inner Source MAC address based load
balancing
inner-dst-mac
Inner Destination MAC address based load
balancing
inner-src-ip
Inner Source IP address based load balancing
inner-dst-ip
Inner Destination IP address based load
balancing
vxlan-vni
Vni of vxlan
gre-key
Key of GRE
nvgre-vsid
Vsid of nvgre
nvgre-flow-id
Flow ID of GRE
Command Mode
Global Configuration
Default
src-ip, dst-ip, src-port-l4, dst-port-l4 are enabled by default.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English