FS TAP Series User Manual

TAP Series Switch Command Line Reference
143
Examples
The following example shows how to display the information of snmp-server sys-info:
Switch# show snmp-server sys-info
Contact: admin@exampledomain.com
Location: Sample Place
Related Commands
snmp-server system-contact
snmp-server system-location
13.6 show snmp-server trap-receiver
To display the SNMP traps receiver, use the show snmp-server trap-receiver command in
privileged EXEC mode.
Command Syntax
show snmp-server trap-receiver
Command Mode
Privileged EXEC
Default
None
Usage
This command is used to display traps receiver information configured by command snmp-
server trap target-address.
Examples
The following example shows how to display the information of snmp-server trap-receiver:
Switch# show snmp-server trap-receiver
Target-ipaddress mgmt-if udpport version pdu-type community

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English