FS TAP Series User Manual

TAP Series Switch Command Line Reference
322
SDRAM size : 2048M
Flash size : 2048M
Hardware Version : 1.2
EPLD Version : 2.1
BootRom Version : 6.1.1
System serial number : E101ZB142025
Related Commands
None
19.2 show stm prefer
Use the show stm prefer privileged EXEC command to display information about the profiles
that can be used to maximize system resources for a particular feature.
Command Syntax
show stm prefer ( current | next | default )
current
Current profile information
next
Next profile information
default
Balance on all kinds of tables size
Command Mode
Privileged EXEC
Default
None
Usage
The numbers displayed for each profile represent an approximate maximum number for each
feature resource. Use this command to show the default balance on all kinds of tables size.
Examples
This is an example of output from the show stm prefer current command,:
Switch# show stm prefer current

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English