TAP Series Switch Command Line Reference
This example shows how to specify the temperature thresholds to default value:
Switch(config)# no temperature
Related Commands
show environment
Use this command to set system current date and time on the Switch.
Command Syntax
clock set datetime ABS_TIME CLOCK_MONTH ABS_DAY ABS_YEAR
Command Mode
Global Configuration
Default
The default time is based from UTC.
Usage
If no other source of time is available, you can manually configure the time and date after
the system is restarted. The time remains accurate until the next system restart. We
recommend that you use manual configuration only as a last resort. If you have an outside
source to which the switch can synchronize, you do not need to manually set the system
clock.
Examples
This example shows how to manually set the system clock
To Next Page
Loading...
Need help?
General
