FS TAP Series User Manual

TAP Series Switch Command Line Reference
227
15 SFLOW Commands
15.1 sflow enable
Use this command to enable sFlow globally.
Use the no form of this command to disable sFlow.
Command Syntax
sflow enable
no sflow enable
Command Mode
Global Configuration
Default
Disabled
Usage
Before any other sFlow command can be configured, sFlow services must be enabled globally.
Use the no parameter with this command to remove all sFlow configurations and disable
sFlow globally.
Examples
This example shows how to enable sFlow services globally:
Switch(config)# sflow enable

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English