FS TAP Series User Manual

TAP Series Switch Command Line Reference
188
Related Commands
rsa key
validate None
14.31 re-activate radius-server
Use this command to re-activate the specified radius servers.
Command Syntax
re-activate radius-server (all | host IP_ADDR ( auth-port AUTHDPORT |)|)
all
Re-active all radius-servers
host IP_ADDR
Re-active the radius-server by server ip
auth-port AUTHDPORT
Re-active the radius-server by server ip and
udp port
Command Mode
Privileged EXEC
Default
None
Usage
Use this command to re-activate the radius server. It's unnecessary for users to wait for the
radius-server dead time with this command.
Examples
This example shows how to re-activate radius-server:
Switch# re-activate radius-server all

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English