FS TAP Series User Manual

TAP Series Switch Command Line Reference
140
13.2 show snmp-server version
To display the supported version of SNMP, use the show snmp-server version command in
privileged EXEC mode.
Command Syntax
show snmp-server version
Command Mode
Privileged EXEC
Default
SNMPv1 and SNMPv2c
Usage
This command is used to display snmp version information configured by command snmp-
server version.
Examples
The following example shows how to display the information of snmp-server version:
Switch# show snmp-server version
SNMP services: SNMPv1/SNMPv2c
Related Commands
snmp-server version
13.3 show snmp-server community
To display the SNMP community information, use the show snmp-server community
command in privileged EXEC mode.
Command Syntax
show snmp-server community

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English