FS TAP Series User Manual

TAP Series Switch Command Line Reference
291
Related Commands
enable
18.2 enable
To enter Privileged EXEC mod, use the enable command in user EXEC or Privileged EXEC
mode.
Command Syntax
enable
Command Mode
Privileged EXEC
Default
None
Usage
To enter Privileged EXEC mod, use the enable command in user EXEC or Privileged EXEC
mode.
The prompt for Privileged EXEC mode is “#”, for EXEC mode is “>”.
Examples
In the following example, the user enters Privileged EXEC mode using the enable command.
The system prompts the user for a password before allowing access to the Privileged EXEC
mode. The password is not printed to the screen. The user then exits back to user EXEC
mode using the disable command:
Switch# disable
Switch> enable
Password:
Switch#

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English