FS TAP Series User Manual

TAP Series Switch Command Line Reference
149
Related Commands
show snmp-server sys-info
13.12 snmp-server system-location
To set the system location string, use the snmp-server system-location command in global
configuration mode.
Use the no form of this command to delete the location string.
Command Syntax
snmp-server system-location KLINE
no snmp-server system-location
KLINE
Specify SNMP system location parameter
Command Mode
Global Configuration
Default
No system location string is set.
Usage
This command is used to set the system location of the SNMP agent so that these
descriptions can be accessed through the configuration file.
Examples
The following example shows how to set the system location string:
Switch(config)# snmp-server system-location Sample Place
The following example shows how to remove the system location string:
Switch(config)# no snmp-server system-location

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English