FS TAP Series User Manual

TAP Series Switch Command Line Reference
204
no enable password privilege PRIVILEGE
PRIVILEGE
Set user privilege level
8
Specifies a hidden password will follow
PASSWORD
Enable password string
Command Mode
Global Configuration
Default
None
Usage
If this command is set, user need to provide the password when enter Privileged EXEC mode.
Examples
The following example shows how to set the password:
Switch(config)# enable password privilege 2 abc123
Switch(config)# exit
Switch# disable
Switch> enable 2
Password:
Switch#
The following example shows how to unset the password:
Switch(config)# no enable password privilege 2
Related Commands
enable
disable
14.48 service password-encryption
Use this command to set up the miscellaneous service encrypt system passwords.
Use the no form of this command to unset service encrypt system passwords.

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English