FS TAP Series User Manual

TAP Series Switch Command Line Reference
224
14.65 accounting exec
Use this command to enable authentication, authorization, accounting (AAA) accounting for
logins.
Use the no form of this command to restore the default value.
Command Syntax
accounting exec ( default | LISTNAME )
no accounting exec
default
Default accounting list
LISTNAME
An accounting list with this name (a-zA-Z0-9._-
)
Command Mode
Line-VTY
Default
None
Usage
Use this command to enable authentication, authorization, accounting (AAA) accounting for
logins.
Use the no form of this command to restore the default value.
Examples
The following example shows how to enable accounting for logins:
Switch# configure terminal
Switch(config)# line vty 0 7
Switch(config-line)# accounting exec default
The following example shows how to set accounting exec to default method list:

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English