FS TAP Series User Manual

TAP Series Switch Command Line Reference
139
13 SNMP Commands
13.1 show snmp
To display the services information of SNMP, use the show snmp command in privileged EXEC
mode.
Command Syntax
show snmp
Command Mode
Privileged EXEC
Default
Disable
Usage
This command is used to display the service information of SNMP (enable or disable).
Examples
The following example shows how to display the information of SNMP:
Switch# show snmp
SNMP services: enable
Related Commands
snmp server enable

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English