FS TAP Series User Manual

TAP Series Switch Command Line Reference
320
Default
None
Usage
None
Examples
The following is show how to source commands from a file:
Switch# source flash:/bash_shutdown.txt
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# interface range eth-0-5 - 7
Switch(config-if-range)# shutdown
Switch(config-if-range)# end
Switch#
Related Commands
None

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English