204 Copying
îš„ Margin Middle
You can specify the middle margin of the copy.
1 Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going
in first; or place a single document face down on the document glass and close the document
cover.
See also:
• "Making Copies From the Automatic Document Feeder (ADF)" on page 186
• "Making Copies From the Document Glass" on page 184
2 Press the (Copy) button.
3 Select Margin Middle, and then press the button.
4 Press the or button or enter the desired value using the numeric keypad, and then press
the button.
5 If necessary, customize other copy options including the number of copies, copy size, and image
quality.
See also:
• "Customizing Copy Options" on page 187
6 Press the (Start) button to begin copying.
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See "mm / inch" on
page 309 for more information.
0-50 mm/0.0-2.0 inch
* Factory default menu setting
To Next Page
Loading...
Need help?
General
