312 Using the Operator Panel Menus and Keypad
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
• Machine life
Purpose:
To specify whether to continue print operations when the printer comes to the end of its service life.
Values:
NOTE:
• When the printer no longer operates showing the error code 191-310 on the LCD panel, press the (Back)
button and the button at the same time and change the Machine life setting to Continue Print.
Then, you can keep using the printer.
• Although you can keep using the printer after the end of its service life by changing the setting to Continue
Print, the printing quality is not guaranteed.
• Initialize NVM
Purpose:
To initialize the NVM for the printer settings, the Phone Book data for fax, and the Address Book data
for scan. Enabling this feature and rebooting the printer will reset all the printer settings and all the
Phone Book (fax) and Address Book (scan) data to their factory default values.
See also:
• "Resetting to Factory Defaults" on page 335
Values:
Black Yes Cleans the toner in the toner cartridge.
No* Does not clean the toner in the toner cartridge.
* Factory default menu setting
Stop Print* Stops print operations at the end of service life.
Continue Print Continues print operations after the end of service life.
* Factory default menu setting
User Fax
Section
Yes Initializes the Speed Dial and Group Dial entries in the Phone
Book.
No* Does not initialize the Speed Dial and Group Dial entries in the
Phone Book.
User Scan
Section
Yes Initializes the e-mail and server address entries in the Address
Book.
No* Does not initialize the e-mail and server address entries in the
Address Book.
System Section Yes Initializes the printer settings.
No* Does not initialize the printer settings.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
