Faxing 247
8 Enter your name or company name using the numeric keypad.
You can enter special symbols by pressing the 1, *, and # buttons as well as alphanumeric
characters.
For details on how to use the numeric keypad to enter alphanumeric characters, see "Using the
Numeric Keypad" on page 337.
9 Confirm the name on the LCD panel is correct, and then press the button.
10 Press the (Back) button several times until the LCD panel shows Select Function.
îš„ Setting the Time and Date
NOTE:
• It may be necessary to reset the time and date in case of power loss.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select System Settings, and then press the button.
4 Select Clock Settings, and then press the button.
5 Select Set Date, and then press the button.
6 Enter the correct date using the numeric keypad, or select the correct date.
NOTE:
• If you make a mistake while entering numbers, press the button to re-enter the digit.
7 Confirm the date on the LCD panel is correct, and then press the button.
8 Select Set Time, and then press the button.
9 Enter the correct time using the numeric keypad, or select the correct time.
10 Confirm the time on the LCD panel is correct, and then press the button.
11 Press the (Back) button several times until the LCD panel shows Select Function.
To Next Page
Loading...
Need help?
General
