Using the Operator Panel Menus and Keypad 289
• Form Line
Purpose:
To set the number of lines in a page.
Values:
NOTE:
• The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and
Orientation settings. Make sure that the Form Line and Orientation settings are correct before
changing the Form Line setting.
• Quantity
Purpose:
To set the default print quantity, within a range from 1 to 999. The default is 1. (Set the number of
copies required for a specific job on the print driver. Values selected on the print driver always override
values selected on the operator panel.)
• Image Enhance
Purpose:
To specify whether to enable the Image Enhance feature which makes the boundary line between
black and white smoother to decrease jagged edges and enhance the visual appearance.
Values:
•Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft
mode.
Values:
64* Select the value in increments of 1.
5-128
* Factory default menu setting
Off* Disables the Image Enhance feature.
On Enables the Image Enhance feature.
* Factory default menu setting
Disable* Does not print in the draft mode.
Enable Prints in the draft mode.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
