Basic Operation 45
Setting Initial Settings on the Operator Panel
You need to set the printer language and the clock date and time when you turn on the printer for the
first time.
When you turn on the printer, a wizard appears on the LCD panel. Follow the steps below to configure
the initial settings.
NOTE:
• If you do not start configuring the initial settings, Select Function appears on the LCD panel in three
minutes. After that, you can configure the following initial settings by selecting Power On Wizard on the
operator panel as needed.
For details on the operator panel, see "Understanding the Operator Panel Menus" on page 282.
1 Select the language you want to use on the operator panel, and then press the button.
2 Press the button to start setting the region.
3 Select your region, and then press the button.
4 Select the appropriate time zone, and then press the button.
5 Specify the current date, and then press the button.
6 Specify the current time, and then press the button.
7 Press the button for fax setup.
If you want to skip the fax setup, press the (Start) button.
8 Enter your fax number, and then press the button.
9 Enter a name, and then press the button.
10 Press the button to complete the initial settings on the operator panel.
To Next Page
Loading...
Need help?
General
