Faxing 265
Automatic Dialing
This section includes:
• "Speed Dialing" on page 265
• "Storing a Fax Number for Speed Dialing" on page 265
• "Sending a Fax Using Speed Dialing" on page 266
• "Group Dialing" on page 266
• "Creating Group Dial Numbers" on page 267
• "Editing Group Dial Numbers" on page 268
• "Sending a Fax Using Group Dialing (Multi-address Transmission)" on page 269
• "Printing the Address Book List" on page 269
îš„ Speed Dialing
You can store up to 99 frequently dialed numbers in fax speed dial locations (01– 99).
When a delayed fax job or a redial job for a speed dial number exists, you cannot change the speed
dial number using the operator panel or the CentreWare Internet Services.
îš„ Storing a Fax Number for Speed Dialing
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Phone Book, and then press the button.
4 Select Speed Dial, and then press the button.
5 Select the desired speed dial number between 01 and 99, and then press the button.
6 Select Name, and then press the button.
7 Enter the name using the numeric keypad, and then press the button.
8 Select Phone Number, and then press the button.
9 Enter the number you want to store using the numeric keypad, and then press the button.
To insert a pause between numbers, press the (Redial/Pause) button and confirm that
"-" appears on the LCD panel.
10 Select Apply Settings, and then press the button.
11 Select Yes, and then press the button.
12 Repeat steps 5 to 11 as needed to add speed dial numbers.
13 To quit adding speed dial numbers, keep pressing the (Back) button until the LCD panel
shows Select Function.
To Next Page
Loading...
Need help?
General
