Using the Operator Panel Menus and Keypad 303
• Forward Settings
Purpose:
To specify whether to forward incoming faxes to a specified destination.
Values:
• Fax Fwd Number
Purpose:
To enter the fax number of the destination to which incoming faxes will be forwarded.
• Fax Fwd E-Mail
Purpose:
To enter the e-mail address to which incoming faxes will be sent with an e-mail.
•Prefix Dial
Purpose:
To specify whether to insert a prefix dial number.
Values:
• Prefix Dial Num
Purpose:
To specify the prefix dial number of up to five digits. This number will be dialed before any automatic
dialing number is started. It is useful for accessing the Private Automatic Branch Exchange (PABX).
Off* Incoming faxes will not be forwarded.
Forward Only Incoming faxes will be forwarded to a specified destination and, if an
error occurs while forwarded, they will be printed.
Forward and Print Incoming faxes will be printed and forwarded to a specified
destination.
E-Mail and Print Incoming faxes will be printed and sent with an e-mail to a specified
destination.
* Factory default menu setting
Off* Does not insert a prefix dial number.
On Inserts a prefix dial number.
* Factory default menu setting
To Next Page
Loading...
Need help?
General
