250 Faxing
îš„ Loading a Source Document on the Document Glass
1 Open the document cover.
2 Place a single document face down on the document glass and align it with the registration guide
on the top left corner of the document glass.
3 Adjust the document resolution, referring to "Resolution" on page 251.
4 Close the document cover.
NOTE:
• Ensure that no document is on the Automatic Document Feeder (ADF). If any document is detected on the
ADF, it will take priority over the document on the document glass.
• If you are faxing a page from a book or magazine, lift the document cover until its hinges are caught by the
stopper and then close the document cover. In case the book or magazine is thicker than 20 mm, start faxing
with the document cover open.
CAUTION:
• Do not apply excessive force to hold a thick document on the document glass. It may break the
glass and cause injuries.
To Next Page
Loading...
Need help?
General
