32 Specifications
Copy Function
Type Console
Memory 256 MB
HDD —
Scanning Resolution Document glass: 600 × 600 dpi
Automatic Document Feeder (ADF): 600 × 300 dpi
Printing Resolution Standard: 600 × 600 dpi
High Resolution: 1200 × 1200 dpi*
* When printing in high resolution mode, printing speed may be reduced
due to image quality adjustment. Printing speed may also be reduced
depending on documents.
Halftone 256 grayscale gradation
Warm-up Time 45 seconds or less*
* The values are based on a room temperature of 22 °C and on the factory
default setting.
IMPORTANT:
• It may take longer due to image quality adjustment.
Original Paper Size Document glass:
The maximum size is 215.9 × 297 mm for both sheets and books.
Automatic Document Feeder (ADF):
The maximum size is 215.9 × 355.6 mm.
Output Paper Size Paper tray:
Maximum: Legal
Minimum: 76.2 × 127 mm (3 × 5")
Priority Sheet Inserter (PSI):
Maximum: Legal
Minimum: A5
Image loss width: Top edge, 4.1 mm or less; bottom edge, 4.1 mm or
less; left and right edges, 4.1 mm or less
Output Paper Weight Paper tray:
60 – 163 gsm (for postcard 60 – 190 gsm is available)
Priority Sheet Inserter (PSI):
60 – 163 gsm
IMPORTANT:
• Use paper recommended by Fuji Xerox. Copying may not be
performed correctly depending on the conditions. For more
information, see "Print Media That Can Damage Your Printer" on
page 134.
First Copy Output Time 20 seconds (for A4 /standard mode)
Reduction/Enlargement Size-for-Size: 1:1
± 1.3%
Preset %: 1:0.50, 1:0.70, 1:0.81, 1:1.00, 1:1.22, 1:1.41, 1:2.00
Variable %: 1:0.25 - 1:4.00 (1% increments)
To Next Page
Loading...
Need help?
General
