Fuji Xerox DocuPrint M255 z User Manual

Using the Operator Panel Menus and Keypad 335
Resetting to Factory Defaults
Enabling the Initialize NVM feature and rebooting the printer will reset all the printer settings and the
Phone Book (fax) and Address Book (scan) data to their factory default menu settings.
NOTE:
• The following procedure does not initialize the network settings.
- To initialize the wired network settings, see "Initialize NVM" on page 297.
- To initialize the wireless network settings on the DocuPrint M255 z model, see "Reset Wireless (DocuPrint
M255 z only)" on page 295.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Initialize NVM, and then press the button.
5 Select System Section to initialize the printer settings, and then press the button.
Select User Fax Section to initialize the Phone Book data for fax.
Select User Scan Section to initialize the Address Book data for scan.
6 Select Yes, and then press the button.
The printer restarts automatically with the factory default menu settings.

Fuji Xerox DocuPrint M255 z Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M255 z
Category	Printer
Language	English