Chapter 3: Programming
EST iO64 and iO500 Technical Reference Manual 95
Setting the passwords
The second step in programming the panel is setting the level one,
two, and remote annunciator passwords.
Note: It is recommended that you change the default passwords
before programming your system.
Note: The system will automatically log you out after four minutes of
inactivity.
Reports
Test
Control
Program
⇩
Program
Date and Time
Clear History
Password
⇩
Enter Password
0000
⇩
Password
Level 1
Level 2
Remote Ann.
⇩
Enter Old Password
0000
⇩
To set the passwords:
1. Press the Menu button.
2. Choose Program.
3. Choose Password.
4. Enter the level two password.
5. Select Level 1, Level 2, or Remote Annunciator.
6. Type the old password.
7. Press Enter.
8. Type the new password.
9. Press Enter.
10. Repeat steps 5 through 9 for each password level.
11. Continue programming your system or press Menu to exit menu
mode.
Enter New Password
0000
To Next Page
Loading...
Need help?
General
