Chapter 1: System operation
32 EST iO64 and iO500 Technical Reference Manual
Restoring a NAC
Once a panel NAC is manually activated, it can be manually
restored. Restoring a panel NAC turns off its outputs, such as turning
off strobes or horns.
Reports
Test
Control
Program
⇩
Enter Password
0000
⇩
Control
Enable/Disable
Activate/Restore
⇩
Activate/Restore
Device
Panel NAC
⇩
To restore a NAC:
1. Press the Menu button on the front panel.
2. Choose Control.
3. Enter your password (the minimum of a level one password is
required).
4. Choose Activate/Restore.
5. Choose Panel NAC.
6. Select the NAC that you want to restore.
7. Press Enter.
8. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
Panel NAC Restore<>
1
NAC 1
To Next Page
Loading...
Need help?
General
