Chapter 3: Programming
112 EST iO64 and iO500 Technical Reference Manual
Advanced programming overview
Advanced programming (custom programming) allows you to
manually custom program the panel by going through each
programming option and selecting a setting for that option. Most
options have a factory default setting, which can be used, or you
can manually select another setting that works for your system.
Refer to "Factory default settings" for a list of all of the defaults.
In advanced programming, you can custom program the loop
configuration options (loops, devices, zones, etc.), panel
configuration options (annunciators, dialer, network, printer, etc.),
panel operation options (language, marketplace, AC fail delay, etc.),
panel events, and loop events. All of these options can be
programmed directly from the front panel.
To do advanced programming, you must have a level two password
and it is recommended that you complete the programming
worksheets and have them available before beginning to program
your system. Go to the "Worksheets" appendix to get a copy of each
worksheet.
Note: Don't forget to set the time and date and it is recommended
that you change the default passwords before auto programming
your system. See "Setting the time and date" and "Setting the
passwords" for more information.
To Next Page
Loading...
Need help?
General
