GE EST iO500 User Manual

Appendix B: Worksheets
224 EST iO64 and iO500 Technical Reference Manual
Device settings worksheet
The device settings worksheet is used to document the
configuration and settings for each of the devices on your system.
Note: For default settings, refer to “Factory default settings.”
Type of device ☐ Photo detector ☐ Photo/heat detector ☐ Heat detector
☐ Duct detector ☐ Ion detector ☐ Relay module
☐ NAC module ☐ Input module
Device ID number
Serial number
Label
(up to 40 characters)
Zone
Correlation groups
Day sensitivity ☐ Normal ☐ Least ☐ Less ☐ More ☐ Most
Night sensitivity ☐ Normal ☐ Least ☐ Less ☐ More ☐ Most
Day pre-alarm
percent
(Off, 50, 55, 60, 65, 70, 75, 80, 90)
Night prealarm
percent
(Off, 50, 55, 60, 65, 70, 75, 80, 90)
Base type ☐ Standard ☐ Relay ☐ Isolator ☐ Sounder
Base follow ☐ Alarm ☐ Alarm verify ☐ Alarm prealarm ☐ Verify ☐ Prealarm
Type ☐ Smoke ☐ Duct alarm ☐ Remote reset
☐ Smoke verify ☐ Duct supervisory ☐ Remote drill
☐ Heat alarm ☐ Supervisory (latching) ☐ Remote signal silence
☐ Heat alarm RoR ☐ Supervisory (nonlatching) ☐ Remote AC fail
☐ Pull station ☐ Relay (nonsilenceable) ☐ Remote test station
☐ Waterflow ☐ Relay (silenceable)
☐ Continuous
(nonsilenceable)
☐ Waterflow (retard) ☐ Genesis (silenceable) ☐ Continuous (silenceable)
☐ Monitor ☐ Genesis (nonsilenceable)
Event notification:
Active
Print ☐ Yes ☐ No
NET ☐ Yes ☐ No
Dialer ☐ Acct 1 ☐ Acct 1 & 2 ☐ Acct 2 ☐ None
Code (4-digit coded output)
CID
Trouble
Print ☐ Yes ☐ No
NET ☐ Yes ☐ No
Dialer ☐ Acct 1 ☐ Acct 1 & 2 ☐ Acct 2 ☐ None

GE EST iO500 Specifications

General

Brand	GE
Model	EST iO500
Category	Control Panel
Language	English