GE Revolution CT User Manual

CAUTION
Do not hit the accessory against the gantry. Patient injury or equipment damage
could result.
You may also see this statement as a warning.
Illustration 19: Coronal head holder warning
WARNING
FALL AND IMPACT HAZARDS. DO NOT HIT ACCESSORY AGAINST
GANTRY. PATIENT INJURY OR EQUIPMENT DAMAGE COULD RESULT.
ACCESSORY MAY FALL AND CAUSE INJURY IF NOT LATCHED TO
CRADLE. MAKE SURE THAT ACCESSORY IS LATCHED TO UNDERSIDE OF
CRADLE. EXCESSIVE WEIGHT CAN BREAK ACCESSORY AND CAUSE
INJURY. DO NOT LOAD MORE THAN 34 KG (75 LBS).
Illustration 20: Bumperless extender warning
WARNING
FALL HAZARDS. ACCESSORY MAY FALL AND CAUSE INJURY IF NOT
LATCHED TO CRADLE. MAKE SURE THAT ACCESSORY IS LATCHED TO
UNDERSIDE OF CRADLE. EXCESSIVE WEIGHT CAN BREAK ACCESSORY
AND CAUSE INJURY. DO NOT LOAD MORE THAN 34 KG (75 LBS).
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
58 3 Symbols and Warning Labels

GE Revolution CT Specifications

General

Detector Coverage	Up to 160 mm
Gantry Tilt	± 30 degrees
Spatial Resolution	Up to 0.23 mm
Scan Range	Up to 200 cm
X-ray Tube Current	Up to 800 mA
Type	Computed Tomography (CT) Scanner
Rotation Speed	0.28 seconds per rotation
Tube Voltage	80 kV to 140 kV
Number of Detector Rows	256
Power Requirements	480 VAC, 3-phase
Detector Rows	256
Coverage	160mm