GE Revolution CT User Manual

13 Data Safety
CAUTION
Incorrect data entries or procedures could result in misinterpretation or
misdiagnosis.
WARNING
SYSTEM DISK SPACE IS LOW. PLEASE PERFORM A SYSTEM RESTART
FROM THE MODE MENU. IF PROBLEM PERSISTS, CONTACT YOUR
SERVICE REPRESENTATIVE.
WARNING
SCAN DATA STORAGE SPACE IS GETTING LOW. PLEASE FINISH ACTIVE
RECONSTRUCTIONS AND UNRESERVE OBSOLETE SCAN DATA .
WARNING
DO NOT LOAD ANY NON-GE APPROVED SOFTWARE ONTO THE
COMPUTER.
WARNING
THE SYSTEM POSTS A WARNING MESSAGE IF THERE IS A FAILURE
DURING THE ARCHIVE OF PATIENT DATA.
WARNING
THE SYSTEM POSTS A WARNING MESSAGE IF THERE IS A FAILURE
DURING THE NETWORK TRANSFER OF PATIENT IMAGE DATA.
WARNING
LOW IMAGE SPACE. PLEASE REMOVE IMAGES AND EMPTY THE
RECYCLE BIN.
WARNING
MISSING SLICES HAVE BEEN INTERPOLATED TO MAKE REFORMATTED
IMAGES.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 3 Safety 81

GE Revolution CT Specifications

General

Detector Coverage	Up to 160 mm
Gantry Tilt	± 30 degrees
Spatial Resolution	Up to 0.23 mm
Scan Range	Up to 200 cm
X-ray Tube Current	Up to 800 mA
Type	Computed Tomography (CT) Scanner
Rotation Speed	0.28 seconds per rotation
Tube Voltage	80 kV to 140 kV
Number of Detector Rows	256
Power Requirements	480 VAC, 3-phase
Detector Rows	256
Coverage	160mm