GE Revolution CT User Manual

Configuration] on a tab, click the one associated with the data you changed (buttons are
grouped with the data they manage in a bordered panel).
•
Click [Apply Configuration] or [Restore Configuration].
Within 5 seconds a message indicates whether the changes were saved or not,
respectively:
○
Enable Authorization
○
Limited User
○
Inactivity Timeout (Minutes)
○
Emergency Prompt
○
Apply Configuration
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
612 2 Access Controls

GE Revolution CT Specifications

General

Detector Coverage	Up to 160 mm
Gantry Tilt	± 30 degrees
Spatial Resolution	Up to 0.23 mm
Scan Range	Up to 200 cm
X-ray Tube Current	Up to 800 mA
Type	Computed Tomography (CT) Scanner
Rotation Speed	0.28 seconds per rotation
Tube Voltage	80 kV to 140 kV
Number of Detector Rows	256
Power Requirements	480 VAC, 3-phase
Detector Rows	256
Coverage	160mm