NOTE
The administrator password must meet the following requirements:
– The default BIOS password is Huawei12#$ for the French or American keyboard and is
Huawei12£$ for the English keyboard.
– The password must be a string of 8 to 16 characters and contain special characters (including
spaces) and at least two types of the following characters: uppercase letters, lowercase letters,
and digits.
– The previous five passwords cannot be reused as a new password.
– After the password is set, the following parameters are displayed:
n Clear Supervisor Password: clears the administrator password.
n
Power on Password: sets the power-on password.
18 Press F10.
The Exit Saving changes? dialog box is displayed.
19 Select Yes and press Enter.
----End
5.4.7 Installing an OS
This topic describes how to install an OS for the G560.
Use the Server Compatibility Checker to check OSs supported by the G560. You are
advised to install an OS on an HDD.
Currently, only Red Hat Enterprise Linux (RHEL) 7.1 supports scheduled hot swap of NVMe
SSDs.
For details about how to install an OS on an HDD, see the HUAWEI Server OS Installation
Guide.
For details about how to install an OS on an NVMe SSD, see Directly Installing an OS in
the HUAWEI Server OS Installation Guide.
NOTE
To upgrade the NVMe SSD driver, download the driver file in the vendor's official website.
5.5 Configuring the G530 V2
This topic describes how to configure the installed G530 V2 to support upper-layer services.
Configuration Process
Figure 5-25 shows the initial configuration process for the G530 V2.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100
To Next Page
Loading...
Need help?
General
Weight and Dimensions
