Huawei RH2288H V3 User Manual

Figure 3-22 Connecting a USB device
----End
3.5.6 Connecting a Serial Cable
The rear panel of the server provides a standard DB9 serial port (three-pin serial
port), which works as the system serial port by default. You can set it as the iBMC
serial port using the iBMC CLI.
The serial port can be used in the following scenarios:
● Used as the system serial port to monitor the status of the OS.
● Used as the iBMC serial port for debugging and fault locating.
For details about the command for setting the serial port as the iBMC serial port,
see
Huawei Rack Server iBMC User Guide .
The following tools are available:
ESD wrist strap or ESD gloves: used to prevent ESD damage
Procedure
Step 1 Align the connector on the serial cable with the serial port, and insert the
connector into the serial port, as shown in Figure 3-23.
RH2288H V3 Server
User Guide 3 Installing and Removing the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 103

Huawei RH2288H V3 Specifications

General

Brand	Huawei
Model	RH2288H V3
Category	Server
Language	English