Step 9 Remove the SATADOM from the mainboard. See step (2) in Figure 7-123.
Step 10 Place the removed SATADOM in an ESD bag.
----End
7.50 Installing a SATADOM
Install a SATADOM to replace the faulty one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the SATADOM to be replaced. For details, see 7.49 Removing a
SATADOM.
Step 3 Take the spare SATADOM out of its ESD bag.
Step 4 Ensure that the SATADOM write protection switch is
o. Figure 7-124 shows
SATADOM-3MG-P, and Figure 7-125 shows SATADOM-3MG2-P.
Figure 7-124 SATADOM-3MG-P
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 258
To Next Page
Loading...
Need help?
General