Step 10 Place the removed SD card board in an ESD bag.
----End
7.54 Installing an SD Card Board
Install an SD card board to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the SD card board to be replaced. For details, see 7.53 Removing an SD
Card Board.
Step 3 Take the spare SD card board out of the ESD bag.
Step 4 (Optional) If SD card 2 needs to be installed, install it
rst. For details, see 7.52
Installing an SD Card.
After the SD card board is replaced, the positions of SD card 1 and SD card 2 cannot be
reversed. SD card 1 is above the SD card board, and SD card 2 is below the SD card board.
Step 5 Align the connector on the SD card board with the port on the mainboard, and
then press the SD card board downwards to secure it to the mainboard. See (1) in
Figure 7-134.
Figure 7-134 Installing an SD card board
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 268
To Next Page
Loading...
Need help?
General