Figure 9-3 Setting
----End
9.2 Logging In to the iBMC WebUI
Log in to the iBMC WebUI using a PC that has Windows 7 and Internet Explorer
8.0 installed.
Before using the remote control function, ensure that the OS, browser, and Java
Runtime Environment (JRE) of the required versions have been installed on the
local PC. For details about the system
conguration requirements of the local PC,
see
Huawei Rack Server iBMC User Guide
.
Ensure that the local PC meets the following networking conditions:
● The local PC is connected to the iBMC management network port on the
server by using a network cable.
● The IP addresses of the local PC and the iBMC management network port are
on the same network segment.
Table 9-2 lists the data to be obtained before you log in to the iBMC WebUI.
Table 9-2 Data to be obtained
Type
Paramet
er
Description Example
User
login
informa
tion
User
name
User name for logging in to the iBMC
WebUI
root
Password User password for logging in to the iBMC
WebUI
NOTE
The default iBMC user name is root, which
belongs to the administrator group. The
default password is Huawei12#$.
Huawei12#$
RH2288H V3 Server
User Guide 9 Common Operations
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 305
To Next Page
Loading...
Need help?
General