Step 7 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 8 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 9 Install the RH2288H V3. For details, see 3.4 Installing the Server.
Step 10 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 11 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.19 Removing the Riser Card
Remove the riser card before replacing it with a new one, replacing the RAID
controller card, or replacing the mainboard.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power o the RH2288H V3. For details, see 4.2 Powering O the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 (Optional) Remove all cables from the riser card if any.
Step 8 Lift the riser card tray. See Figure 7-33.
Figure 7-33 Removing a riser card tray
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 177
To Next Page
Loading...
Need help?
General