Figure 7-62 Installing the system battery
Step 5 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 6 Install the RH2288H V3. For details, see 3.4 Installing the Server.
Step 7 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 8 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.31 Removing the Screw-in RAID Controller Card
Remove a screw-in RAID controller card before replacing it with a new one. The
appearance and position of a screw-in RAID controller card may vary according to
models, but the removal method is the same.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power
o the RH2288H V3. For details, see 4.2 Powering O the Server.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 203
To Next Page
Loading...
Need help?
General