Name: Huawei RH2288H V3
Brand: Huawei
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Step 12 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.

Step 13 Log in to the RAID conguration screen to check whether RAID conguration

needs to be imported or activated. For details, see

Huawei V2 and V3 Server

RAID Controller Card User Guide

----End

7.33 Removing the PCIe Plug-in RAID Controller Card

Remove a PCIe plug-in RAID controller card before replacing it with a new one.

Procedure

Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.

Step 2 Determine the cabinet number and chassis number of the server, and label its

panel to prevent misoperations.

Step 3 Power

o the RH2288H V3. For details, see 4.2 Powering O the Server.

Step 4 Remove all external cables such as power and network cables.

Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6

Removing the Server.

Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.

Step 7 Remove the riser card if the RAID controller card to be removed is installed on a

riser card. For details, see 7.19 Removing the Riser Card.

Step 8 Check the chip model of the RAID controller card to be removed.

If the chip model of the RAID controller card to be removed is LSI SAS3108,

remove the trans

ash module (TFM) rst. For details, see 7.36 Removing the

Supercapacitor (PCIe Plug-in RAID Controller Card).

If the chip model of the RAID controller card to be removed is PM8060, remove

the cable between the supercapacitor and the RAID controller card. For details, see

7.36 Removing the Supercapacitor (PCIe Plug-in RAID Controller Card).

Step 9 Remove the SAS cables from the standard RAID controller card.

Step 10 Remove the standard RAID controller card.

● For details about how to remove a standard RAID controller card from the

mainboard, see 7.21.2 Removing a PCIe Card from the Mainboard.

● For details about how to remove a standard RAID controller card from a riser

card, see 7.21.1 Removing a PCIe Card from a Riser Card.

Step 11 Place the removed standard RAID controller card in an ESD bag.

----End

7.34 Installing a PCIe RAID controller card

Install a PCIe RAID controller card to replace the original one.

RH2288H V3 Server

User Guide 7 Replacing Parts

Huawei RH2288H V3 User Manual

Questions and Answers: